If you haven’t read Part 1, please do so before reading this post for complete details and tasting notes. To quickly summarize, the first and second shots I pulled were off. The first shot was too fast and the second was too slow. This time, the flow and timing were right on point using the same variables, only difference was the grind size. I started by using the 300 and 600 micron sieves and 34.6gm of coffee from the Super Jolly, which is almost two times my usual dose of 17.5gm.
I dumped the 34.6gm of coffee into the Kruve and started sitting for approximately 1 minute.
The result from the middle tray was approximately 22.5gm, which means between boulders and fines, I lost 12gm. That’s a hair better than last week’s experiments.
Out of the 22.5gm I used approximately 17.5gm (my usual dose) and pulled the shot
The shot was neither fast nor slow, very much the same time it takes for my non-sifted shots but the taste was nothing like my usual shots. The shot was absolutely delicious, creamy, sweet, rich and with a tiny little bit of welcomed acidity. I’m not a fan of too much acidity that’s why I stay away from light roast coffees but the acidity here was just a hint and it added to the complexity of the shot.
My conclusion here is that the Kruve and its impact on the uniformity of coffee grounds is undeniable but the questions are, will I be okay with sacrificing more than 10gm of coffees every time I pulled a shot? What about the time, do I really want to add more than 15 Minutes (cleaning the Kruve and the mess it makes take time), to my routine and workflow to achieve a better shot? With these questions in mind, I have decided to use the Kruve but only on weekends. On weekends, I have much more time in the morning and I can enjoy the process. On weekdays, not so much.