If you haven’t read my previous post about my coffee equipment and station, please do so before reading this post as it will give you a better idea as to how different this new station is.
For some time now, I have been scouring the web trying to find a table that’s 60 inches wide by 30 inches deep and 34 to 36 inches in height and under $100 (my total budget for the project is $100 to $120). The reason for those measurements is simply because that’s the largest table I can fit in my kitchen and I was going after the largest table since I have a lot of stuff and I wanted to contain it in one place. Also, my wife was getting tired (never complained though and that’s why I love her!) of me sharing the kitchen counter space with her so this size table will allow me to get everything done in one place and also tuck the mini fridge under the table instead of next to it. This was my setup until last weekend before my father and I completed the new station
I finally found the perfect table, it’s a butcher block, measures 60x30x34.25 inches and looked like it was built like a tank, one issue though, I live in New Jersey and the table was in Long Island, New York.
The table was listed on Facebook marketplace for $75 and I negotiated it down to $60, which is a discount that helped offset the cost of tolls and gas. It was a Saturday and I borrowed my mom’s Chevrolet Equinox (I measured my wife’s Jeep and the table wouldn’t fit) and my wife and I decided to make a day out of it. We left New Jersey heading to Long Island around 10 am and was there, on time, at 11.30 am. The table didn’t fit all the way in the car and so we ended up leaving the trunk slightly open but tied down with ropes and bungee cords. Upon arrival and further inspection, I noticed that there are some deep scratches that will require some major sanding and paint chips on the white paint, which will require sanding and repainting. Here’s a picture of how the table looked like when I went to pick it up.
And another picture showing the scratches
On the way back from New York, I went to Home Depot and purchased white semi gloss paint, wood stain, 2 paint brushes and sandpaper. The supplies cost a little less than $40, bringing the total cost of the table to just under $100, not including tolls and gas. As soon as I got back home I went to work on the table and called my father and asked him for help. Luckily, he was free the whole day Sunday and told me that he will stop by first thing after church to give me a hand.
First thing I did to the table after we came back home on Saturday was to sand the tabletop
Once the staining was done the table was pretty much complete.
The tougher part was lifting this beast and bringing it inside the house, this required my wife’s help as my father’s back has seen better days. Once inside I proceeded to arrange my stuff and admire the weekend’s worth of hard work….and it was beautiful!